I. Overview                         

 Engine Coolant Boiling Point Tester is a device used to measure the equilibrium boiling point of engine coolant, suitable for measuring diluted or concentrated engine coolant.

II. Technical Characteristics     

1. The design of this instrument fully complies with the requirements of SH/T0089 standard.

2. The heating adopts an electric furnace, and the heating power is steplessly adjustable from 100W to 1000W, making it convenient and reliable.

3. Reflux condenser pipe:long 200mm

III. Instructions And Precautions For Use             

 Installation of an instrument:

1. Take out the adjustable electric heater and place it on a flat,

high-temperature resistant, flame retardant workbench or flat plate.

2. Place the bracket table and bracket rod at the rear of the adjustable electric heater, place the condenser tube holder in a suitable position on the bracket rod, and clamp the condenser with the tube clamp.

3. Connect the circulating water silicone hose at the inlet and outlet of the condenser, connect tap water during working hours, and install a customized flask at the bottom of the condenser tube.